Self-Adhesive LVT Flooring for Fast Indoor Renovation
Upgrade residential and light-commercial interiors efficiently with our peel and stick wood-look vinyl flooring.
The flooring combines decorative wood-grain designs with a
factory-applied self-adhesive backing, simplifying installation over
properly prepared indoor subfloors.
It is suitable for bedrooms, living rooms, home offices, rental
properties, retail displays, RV interiors and other renovation projects
requiring fast installation and convenient routine maintenance.
Printed wood-grain designs and embossed textures provide a warm,
natural appearance for residential and light-commercial
renovation projects.
The factory-applied adhesive backing eliminates the need to
spread separate wet adhesive on suitable indoor subfloors.
The supplied test sheet records passing results for length,
width, total thickness, straightness and squareness.
The product passes the stated dimensional-stability and
heat-curling requirements under GB/T 4085-2015.
Residual indentation passes the stated requirement of no more
than 0.10mm according to ISO 24343-1.
Testing records no observable surface change under the stated
stain-resistance requirement.
The PVC surface is suitable for routine spills and damp
cleaning. The completed self-adhesive installation should not,
however, be treated as a permanently waterproof system.
The flooring passes the supplied DIN 51130 requirement of
R9 or higher.
The product passes the stated color-fastness requirement of
Grade 6 or higher.
Residual vinyl chloride monomer, soluble lead, cadmium and
formaldehyde are reported as not detected in the supplied data.
Confirm that the surface is structurally stable, level, smooth
and free from cracks, loose material and excessive moisture.
Remove dust, oil, wax, grease and other contaminants that could
reduce adhesive bonding strength.
Measure the room, establish reference lines and dry-lay several
pieces before removing the release paper.
Remove the backing paper gradually, align the flooring carefully
and avoid contaminating the adhesive surface.
Press the flooring firmly and use a suitable hand roller or
flooring roller to achieve full adhesive contact.
Avoid washing, dragging furniture or applying concentrated loads
until the adhesive has achieved sufficient bonding strength.
Peel and Stick Wood-Look Vinyl Flooring
Product Specifications
Product Name
Peel and Stick Wood-Look Vinyl Flooring
Product Category
Self-Adhesive LVT / PVC Flooring
Available Thickness
1.5mm / 2.0mm, subject to final order confirmation
Installation Type
Factory-Applied Self-Adhesive Backing
Surface Design
Printed Wood-Grain Design with Embossed Texture
Surface Appearance
Matte or Low-Gloss Finish
Wear Resistance
T/P, as stated on the supplied technical data sheet;
the applicable class depends on the selected model
Residual Indentation
Passes the requirement of ≤0.10mm
Slip Resistance
R9 or higher
Color Fastness
Grade 6 or higher
Fire Classification
B1 (B-s1), according to the supplied data sheet
Formaldehyde Test
N.D. — Not Detected
Recommended Subfloor
Smooth, flat, clean, dry and structurally stable
indoor surfaces
Technical Data
Performance
Test Method
Requirement
Result
Length / Width
GB/T 4085-2015
Nominal deviation: −0.13% to +0.13%
Individual piece deviation: within ±0.4mm
Pass
Total Thickness
GB/T 4085-2015
Nominal deviation: −0.10mm to +0.13mm
Individual piece deviation: −0.15mm to +0.15mm
Pass
Wear Layer Thickness
GB/T 4085-2015
Nominal deviation: −10% to +13%
Individual piece deviation: ≤0.10mm
Pass
Wear Resistance
GB/T 4085-2015
—
T/P
Squareness
GB/T 4085-2015
≤0.35mm
Pass
Straightness
GB/T 4085-2015
≤0.35mm
Pass
Dimensional Stability After Heating
GB/T 4085-2015
Width-wise: 0.25%
Length-wise: 0.25%
Pass
Curling After Heating
GB/T 4085-2015
≤2mm
Pass
Residual Indentation
ISO 24343-1
≤0.10mm
Pass
Color Fastness
GB/T 4085-2015
≥6
Pass
Slip Resistance
DIN 51130
≥R9
Pass
VOC Limit
GB 18586-2001
≤10g/m²
Pass
Residual Vinyl Chloride Monomer Content
GB 18586-2001
≤5mg/kg
N.D. — Not Detected
Heavy Metal Content
GB 18586-2001
Soluble lead and cadmium: ≤20mg/m²
N.D. — Not Detected
Formaldehyde Content
GB 18580-2001
≤1.5mg/L
N.D. — Not Detected
Stain Resistance
GB/T 17657-2013
No observable surface change
Pass
Fire-Retardant Classification
GB 8624-2012
—
B1 (B-s1)
Key Features and Benefits
Realistic Wood Appearance
Fast Self-Adhesive Installation
Controlled Dimensional Tolerances
Heat Stability
Low Residual Indentation
Stain-Resistant Surface
Water-Resistant PVC Surface
R9 Slip Resistance
Color Stability
Controlled Chemical Content
Installation Steps
1. Inspect the Subfloor
2. Clean and Dry
3. Plan the Layout
4. Peel and Position
5. Press and Roll
6. Protect After Installation
Recommended Applications
WPC
XL Extra-Long & Wide WPC Flooring for Hotel Lobbies
Peel and Stick Wood-Look Vinyl Flooring Self-Adhesive LVT Flooring for Fast Indoor Renovation Upgrade residential and light-commercial interiors effi...
Direct response from our flooring team.
Technical Note: The supplied technical data sheet provides dimensional tolerances and
test requirements but does not state the actual nominal plank length,
plank width or wear-layer thickness. These values must be confirmed
according to the selected product specification before quotation and
production.
Test Data Notice: The notation “T/P” is reproduced directly from the supplied data sheet.
The applicable wear-resistance class should be confirmed for the
selected product model. The VOC and heavy-metal units should also be
verified against the complete third-party laboratory report before
being used in formal tender documents.
Data-Sheet Disclaimer: The supplied sheet states that the data was tested and issued by a
third party and is provided for reference only. It should not be treated
as the confirmed performance specification of a specific product unless
the tested sample, model number and production specification are verified.
Installation Notice: Install only over smooth, flat, clean and dry indoor surfaces. The
flooring is not recommended for dusty or uneven concrete, damp
subfloors, loose ceramic tiles, outdoor areas, shower rooms or locations
exposed to standing water. Primer or additional compatible adhesive may
be required depending on the subfloor condition.
Product inquiry
Tell us about your requirement.
Include the application, area, target specification, quantity and destination so we can respond precisely.
Continue exploring
Related products
