Self-Adhesive LVT Flooring for Fast Indoor Renovation Projects
Renovate residential and light-commercial interiors efficiently with
our peel and stick wood-look vinyl flooring.
The planks combine realistic wood-grain designs with a factory-applied
adhesive backing, allowing installation over suitable smooth, clean,
dry and stable indoor subfloors.
The flooring is suitable for rental-property upgrades, bedrooms,
living rooms, offices, retail displays, RV interiors and other
renovation projects where fast installation and convenient routine
maintenance are required.
Printed wood-grain designs and embossed surface textures create
a warm decorative appearance for residential and commercial
renovation projects.
The factory-applied adhesive backing eliminates separate wet
adhesive application for suitable indoor subfloors.
The supplied test sheet records passing results for dimensional
stability, straightness, squareness and heat curling.
Residual indentation passes the stated requirement of no more
than 0.10mm under ISO 24343-1.
Testing records no observable surface change under the stated
stain-resistance requirement.
The PVC surface is resistant to routine spills and damp
cleaning. However, the completed self-adhesive installation
should not be treated as a fully waterproof system.
The flooring passes the supplied DIN 51130 requirement of
R9 or higher.
Residual vinyl chloride monomer, heavy metals and formaldehyde
were reported as not detected in the supplied test data.
Confirm that the surface is structurally stable, level, smooth
and free from cracks, loose material or excessive moisture.
Remove dust, oil, wax, grease and other contaminants that could
reduce adhesive bonding strength.
Measure the room, establish reference lines and dry-lay several
pieces before removing the backing film.
Remove the release paper gradually, align the plank carefully
and avoid touching or contaminating the adhesive surface.
Press the flooring firmly and use a suitable hand roller or
flooring roller to ensure full adhesive contact.
Avoid washing, dragging furniture or applying concentrated
loads until the adhesive has achieved adequate bonding.
Peel and Stick Wood-Look Vinyl Flooring
Product Specifications
Product Name
Peel and Stick Wood-Look Vinyl Flooring
Product Category
Self-Adhesive LVT / PVC Flooring
Available Thickness
1.5mm / 2.0mm, subject to final order confirmation
Installation Type
Factory-Applied Self-Adhesive Backing
Surface Design
Wood-Grain Print with Embossed Texture
Surface Appearance
Matte or Low-Gloss Finish
Wear Resistance Result
T/P, as stated on the supplied technical data sheet
Slip Resistance
R9 or higher
Fire Classification
B1 (B-s1), as stated on the supplied data sheet
Formaldehyde Test
N.D. — Not Detected
Recommended Subfloor
Smooth, flat, clean, dry and structurally stable
indoor surfaces
Technical Data
Performance
Test Method
Requirement
Result
Length and Width
GB/T 4085-2015
Nominal deviation: −0.13% to +0.13%
Individual piece deviation: within ±0.4mm
Pass
Total Thickness
GB/T 4085-2015
Nominal deviation: −0.10mm to +0.13mm
Individual piece deviation: −0.15mm to +0.15mm
Pass
Wear Layer Thickness
GB/T 4085-2015
Nominal deviation: −10% to +13%
Individual piece deviation: ≤0.10mm
Pass
Wear Resistance
GB/T 4085-2015
—
T/P
Squareness
GB/T 4085-2015
≤0.35mm
Pass
Straightness
GB/T 4085-2015
≤0.35mm
Pass
Dimensional Stability After Heating
GB/T 4085-2015
Width-wise: 0.25%
Length-wise: 0.25%
Pass
Curling After Heating
GB/T 4085-2015
≤2mm
Pass
Residual Indentation
ISO 24343-1
≤0.10mm
Pass
Color Fastness
GB/T 4085-2015
≥6
Pass
Slip Resistance
DIN 51130
≥R9
Pass
Volatile Organic Compounds
GB 18586-2001
≤10g/m²
Pass
Residual Vinyl Chloride Monomer Content
GB 18586-2001
≤5mg/kg
N.D. — Not Detected
Heavy Metal Content
GB 18586-2001
Soluble lead and cadmium: ≤20mg/m²
N.D. — Not Detected
Formaldehyde Content
GB 18580-2001
≤1.5mg/L
N.D. — Not Detected
Stain Resistance
GB/T 17657-2013
No observable surface change
Pass
Fire-Retardant Classification
GB 8624-2012
—
B1 (B-s1)
Key Features and Benefits
Realistic Wood Appearance
Fast Self-Adhesive Installation
Dimensional Stability
Low Residual Indentation
Stain-Resistant Surface
Water-Resistant PVC Surface
R9 Slip Resistance
Controlled Chemical Emissions
Installation Steps
1. Inspect the Subfloor
2. Clean and Dry
3. Plan the Layout
4. Peel and Position
5. Press and Roll
6. Protect After Installation
Recommended Applications
LVT
1.5/2mm Peel-and-Stick Wood-Look LVT Plank for DIY Decor
Peel and Stick Wood-Look Vinyl Flooring Self-Adhesive LVT Flooring for Fast Indoor Renovation Projects Renovate residential and light-commercial inte...
Direct response from our flooring team.
Technical Note: The supplied technical sheet reports dimensional tolerances and test
results but does not state the actual nominal plank length, width or
wear-layer thickness. These values must be confirmed according to the
selected product specification before quotation or order production.
The notation “T/P” and the units shown for VOC and heavy-metal content
should be reconfirmed against the original third-party test report.
Data-Sheet Disclaimer: The supplied sheet states that its data was tested and issued by a
third party and is provided for reference only. It should not be treated
as the confirmed performance specification of a particular product
unless the model number and test sample are verified.
Installation Notice: Suitable for smooth, flat, clean and dry indoor surfaces. It is not
recommended for dusty or uneven concrete, damp subfloors, loose ceramic
tiles, outdoor areas, shower rooms or locations exposed to standing
water. A primer or additional compatible adhesive may be required
depending on the subfloor condition.
Product inquiry
Tell us about your requirement.
Include the application, area, target specification, quantity and destination so we can respond precisely.
Continue exploring
Related products
